Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Alphair stainless steel pneumatic actuator APS spring return
Pneumatic actuator with 1/4 turn rack and pinion. Body and caps in stainless steel 316. PS: 8 bar - TS: -20 / +80°C. Solenoid pilot valve mounting according to NAMUR, valve mounting according to ISO 5211. ATEX EEx II 2G/D c.
Details
Flanged ball valve with floating ball
Body in steel 1.0619
Ball in stainless steel A 351 Gr. CF8M
Seats in Stansit
Max. working pressure: 40 bar (DN 15 to DN 50), 16 bar (DN 65 to DN 200)
Face to face: EN558-1 series 27
Connection: flanged PN 16/40 (DN 15 to DN 50), PN 16 (DN 65 to DN 200)
ISO mounting flange
Fire safe according to ISO 10497
With stem extension and protection in stainless steel (L = 100 mm)
With pneumatic actuator spring return type PE, spring to close, air to open
Equipped with:
Switchbox Topworx TXP-E20GNPM
Solenoid valve fig. MNAMXC24 - 24 VUC, Atex II 2G/D - EExem II T5, with cable (3 m)
Knee stud instant - rotatable with BSP parallel thread and O-ring seal - 8 x 1/4''
Screw-in silencer - with body in brass and stainless steel damping - diam. 1/4''
Details
In categories : Pneumatic actuators
Configurations